Driver/Tech Requirements

DRIVER / SAFETY EQUIPMENT

* SA2010 or newer full faced helmet required. **DOT motorcycle helmets will NOT pass** Open face helmets are ONLY allowed with 4-point harnesses, and NOT allowed with stock belts.
* Closed toe shoes and shirts required.
* Fire extinguishers are mandatory for all cars. They must be securely mounted in a “quick release mount”, within reach of the driver while buckled in.

ENGINE

* No fluid leaks
* If your engine has rod knock/is on the verge of death, you will not be allowed on track. If the knock/death sentence comes during the event, you will be asked to stop driving. WE DON’T WANT TO CLEAN UP OIL OFF THE TRACK!
* Coolant overflow tank is mandatory
* Gas cap must be present and sealed.
* If you have fuel cell instead of a stock tank, it must be top port (no bottom sump drag style cells), and it must be completely separated from the passenger compartment of the car by a sealed metal firewall.

WIRING

* All wiring should be insulated/covered/taped/NO COPPER SHOWING!
* Battery must be TIGHTLY SECURED! No floppy batteries! (no zip ties, ratchet straps, or bungees)
* Must have working headlights and taillights (night events)
* Positive battery terminal must be covered
* If battery is in the passenger compartment, it must be in a sealed box.

SUSPENSION / WHEELS / BRAKES

* Brakes must work and have adequate pedal pressure
* Must have ALL LUG NUTS AND LUG STUDS!
* No excessive steering wheel/suspension play
* Functioning handbrake HIGHLY recommended

SEATS / HARNESSES / INTERIOR

* ALL LOOSE ITEMS MUST BE REMOVED FROM CAR. If it is not bolted down, it needs to be removed from your car before driving.
* Seats must be securely mounted
* If harnesses are installed a harness bar must be installed. Harnesses MAY NOT be bolted directly to the floor. A strut tower bar is NOT a harness bar. if you need to know how to properly mount your harnesses, google it. there’s even pictures and stuff.
* Lap AND Shoulder belt MUST be used
* Seat belts/Harnesses must be used at all times.
* Due to their design, we prefer stock belts with stock seats, and aftermarket harnesses with aftermarket seats.

BODY / GLASS

* Windshield must not have ANY cracks interfering with the driver’s view. small cracks are up to the discretion of the Tech official, but the general rule is if it touches your window frame in two places, it will NOT pass tech.
* Tow straps are HIGHLY recommended. Factory tow hooks are accepted, but tow straps will be much safer for towing your car. It’s not our fault if you aero gets ripped off pulling you out of the weeds.
* Hood and trunk must be securely latched with OEM latches or pins.
* Please secure your aero appropriately, or just take it off. We don’t want to have to go get your bumper or side skirt after every run.